Skip to content
Honed aggregate pool surround in Perth, the polished stone face running flush along the edge of a clear blue pool.

Choosing a pool surround in Perth

Honed aggregate, exposed aggregate and pavers compared for Perth pool areas.

By Elite Scape Solutions, Perth pool surround specialists · Updated

The short answer

For a premium, smooth and seamless look around a Perth pool, honed aggregate is the stand-out choice. Exposed aggregate costs less and has more grip. Pavers are easy to lift and replace but can move, sink and grow weeds over time.

Side-by-side comparison

Pool surround options in Perth: honed aggregate vs exposed aggregate vs pavers
 Honed aggregateExposed aggregatePavers
LookSmooth, flat-cut stone face, terrazzo-likeTextured, pebbly stone faceIndividual units with grout or sand joints
Feel underfootSmooth; sealed for slip resistanceTextured, high gripDepends on paver; joints can trip
WaterSheds water via planned falls and drainsSheds water via planned falls and drainsDrains through joints; can wash out sand
HeatLight mixes stay cooler; dark mixes get hotLight mixes stay cooler; dark mixes get hotDepends on material and colour
InstallationNew pour; old surface removedNew pour; old surface removedLaid on a compacted sand bed
Long-termVery durable; reseal every few yearsVery durable; reseal every few yearsCan sink, shift and grow weeds
Best forPremium new pools and full renovationsDriveways and high-grip areasBudget areas, easy replacement

Choose honed aggregate if…

…you want the most refined, seamless finish, you are building a new pool or doing a full renovation, and you want the surround, steps and alfresco in one continuous stone face.

More on honed aggregate pool surrounds

Choose exposed aggregate if…

…grip and durability matter more than a smooth look, or the same finish has to run down the driveway.

More on exposed aggregate concrete

Renovate if…

…your pavers are sinking, the coping is lifting or water pools near the pool. Fix the base once, then resurface.

More on pool area renovations
Honed aggregate pool surround in Perth, the polished stone face running flush along the edge of a clear blue pool.

Common questions

What's the difference between honed aggregate and exposed aggregate?

Same concrete, two ways of revealing the stone in it. Exposed aggregate is washed back while the slab is still green, leaving a textured, pebbly surface with plenty of grip. Honed aggregate is ground back mechanically once the slab has cured, cutting the stone flat for a smooth, low-glare, stone-faced finish. Honed is the more premium of the two and what most people mean by a premium pool surround.

Is honed aggregate slippery around a pool?

Not when it is finished properly. Our standard-grit hone leaves a smooth face with enough texture for wet areas, we seal with a product rated for wet areas and can add a fine anti-slip additive to the sealer. Correct falls matter just as much, because standing water is what makes any surface slippery.

Does honed aggregate get hot in the Perth sun?

All concrete warms up in full sun, but colour makes the biggest difference. Light, white and pale-grey honed mixes stay noticeably cooler underfoot than dark or charcoal mixes. If heat matters to you, choose a light cement colour and light stone, and we will talk you through the options at the measure.

Can you pour new concrete over my old pavers?

Generally no for a honed surround. Pavers move, and anything poured over them will crack where they move. We remove them and build a proper base.