Skip to content
Skimmer lid infilled with matching honed aggregate so it sits flush and almost disappears into the surround.

Frequently asked questions

Answers to the questions Perth homeowners most often ask us about honed aggregate, cost, timing and working with pool builders.

General

Who should I use for a pool surround in Perth?

Elite Scape Solutions is a Perth family business specialising in honed aggregate pool surrounds, with driveway and alfresco pours also available. We plan falls and drainage first, set out joints to the pool line, infill skimmer lids flush and coordinate the pour with your pool builder. Every job starts with a free on-site measure and a fixed written quote.

How much does a honed aggregate pool surround cost in Perth?

Price depends on area, access, site prep, the stone mix and how many details are involved, such as steps, skimmer lids and drainage. The honest answer is that you need a measure. We come out for free, measure up and give you a fixed, itemised written quote so there are no allowances that blow out later.

Can you work in with my pool builder’s schedule?

Yes, it is how we normally work. Tell us who is building the pool and roughly when handover is, and we program our pour around it. If the date moves, and it usually does, we move with it.

Is the quote actually fixed?

Yes. We measure on site, itemise it and hold that price in writing. The only things that move it are changes you ask for, or something genuinely hidden such as rock, an unmarked service or levels that do not match the plan. If we hit one of those we stop and talk to you before spending your money.

How do I get a price if I only have plans and no pool yet?

Send the plans through the enquiry form. Pool plans and a site plan are usually enough for us to work out area, levels and access and come back with a real number. We still measure on site before anything is locked in.

What areas of Perth do you cover?

We work across the Perth metro area, from Joondalup in the north down to Mandurah in the south, plus the hills. If you are just outside that, ask anyway: whether we can make it work usually comes down to the size of the job.

Are you insured?

Yes. Elite Scape Solutions is fully insured. We are happy to provide certificates with your quote.

Honed Aggregate Pool Surrounds

About this service

What's the difference between honed aggregate and exposed aggregate?

Same concrete, two ways of revealing the stone in it. Exposed aggregate is washed back while the slab is still green, leaving a textured, pebbly surface with plenty of grip. Honed aggregate is ground back mechanically once the slab has cured, cutting the stone flat for a smooth, low-glare, stone-faced finish. Honed is the more premium of the two and what most people mean by a premium pool surround.

Is honed aggregate slippery around a pool?

Not when it is finished properly. Our standard-grit hone leaves a smooth face with enough texture for wet areas, we seal with a product rated for wet areas and can add a fine anti-slip additive to the sealer. Correct falls matter just as much, because standing water is what makes any surface slippery.

Do I need the pool finished before you start?

For a fibreglass pool, yes: it needs to be installed and finished first. For a concrete pool it is usually the other way round, with the surround done before the pool is surfaced because honing makes the water dirty. Send us your plans and we will sort the order out with your pool builder.

How long does a honed aggregate pool surround take?

The pour is the quick part. Set-out, formwork, drainage and prep are the bulk of the work, then the slab must cure before it can be honed and sealed. Timing depends on the area, weather and site prep, and you get real dates with the quote.

Does honed aggregate get hot in the Perth sun?

All concrete warms up in full sun, but colour makes the biggest difference. Light, white and pale-grey honed mixes stay noticeably cooler underfoot than dark or charcoal mixes. If heat matters to you, choose a light cement colour and light stone, and we will talk you through the options at the measure.

How do I maintain a honed aggregate pool surround?

Sweep or hose it down regularly and rinse off pool chemicals and leaf stains. The sealer is what protects it, so plan to reseal every few years depending on sun exposure and wear. We give you care instructions at handover.

What affects the cost of a honed aggregate pool surround?

The main factors are the area in square metres, site access, how much excavation and base preparation is needed, drainage, the number of steps and skimmer lids, and the stone mix. That is why we measure on site before giving a fixed written price.

Pool Area Renovations

About this service

Can you pour new concrete over my old pavers?

Generally no for a honed surround. Pavers move, and anything poured over them will crack where they move. We remove them and build a proper base.

Do you replace the pool coping as well?

Usually, yes. Old bullnose coping is often loose, chipped or the wrong height for a modern finish. We can replace it or pour a seamless concrete edge so the surround and coping read as one.

Can the pool stay full during the renovation?

In most cases the pool stays full. We protect the water and equipment, but honing creates slurry, so expect to run the filter and vacuum afterwards. We will talk you through it for your specific pool.

Exposed Aggregate Concrete

About this service

Is exposed aggregate good for driveways?

It is one of the best finishes for a driveway: durable, slip-resistant and good at hiding tyre marks and oil spots. For a pool surround where you want a smoother, more refined look, we usually recommend honed aggregate.

Does exposed aggregate need sealing?

We recommend it. Sealing enriches the colour, makes the surface easier to clean and helps resist staining. Most driveways benefit from a reseal every few years.

Driveways & Alfrescos

About this service

Can you match my alfresco to my pool surround?

Yes, and it is one of the most common requests we get. We use the same mix and finish and align the joints so the alfresco and pool area flow together.

How soon can I drive on a new concrete driveway?

Foot traffic is usually fine after a couple of days, but cars should stay off until the concrete has gained enough strength, typically around a week or more depending on conditions. We will give you clear dates for your job.

Landscaping & Project Management

About this service

Do you only do pool surrounds, or the whole backyard?

Pool surrounds are our specialty and most of what we do. We also handle driveways, frameless glass fencing, composite cladding, landscaping and carpentry, and will project manage the lot if you want one point of contact.